Interconnect Specialties, Inc.

 

It’s a good connection to have.

 

Located in

Southern California

 

Phone 714-674-5090   Fax 714-674-5088

 

Products

 

Services

 

Manufacturers

 

About

 

Contact

 

                   Home

 

Stewart Connectors    << back

 

Series 80

Cable-Ready Jacks
Unshielded

80s.jpg (7101 bytes)

Go to catalog page
..

The rugged design of our cable-ready jacks is ideal for telco, data, mobile, and coupling applications.  The 80 Series is available with built-in strain relief.

Features/Benefits

  • Designed for fast and easy for termination
  • Accomodates 24 and 26 AWG
  • User-friend Load and Lace wire management technique enables easy assembly and termination
  • Reliable one-step installation with ratchet hand tool
  • Optimized for mobile/cellular applications
  • Two load bar options for small and large wires
  • See How to Order for additional options

 

Specifications

Materials
Jack Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Beryllium copper
Contact Plating: Selective gold plate in contact area

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)
Jack Tolerances and Dimensions: Compliant with FCC requirments

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Series 82

CableJack Premises Wiring Jacks
Shielded and Unshielded

82s.jpg (9551 bytes)

Go to catalog page
..

The Load and Lace feature of the CableJack ensures fast, easy, and reliable cable termination whether you're an OEM or an installer.  The compact size is ideal for shallow wall plate, side-by-side, and stacked applications.

Features/Benefits

  • Designed for high-performance Category 5, premises wiring applications
  • Shielded and unshielded versions available
  • Accomodates 24 and 26 AWG
  • User friendly Load and Lace wire management technique enables easy assembly and termination
  • Available with standard voice and data bezels in a variety of colors
  • Reliable one-step installation with ratchet hand tool
  • See How to Order for additional options

82wall.jpg (4159 bytes)

The compact CableJack design enables close, side-by-side  stacking and requires less space behind the wall.

 

Specifications

Materials
Jack Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Beryllium copper
Contact Plating: Selective gold plate in contact area
Shieldeing: Tin-plated brass

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)
Jack Tolerances and Dimensions: Compliant with FCC requirments

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Series 72

PC-Mount, MagJack and Filter Jacks
Enhanced Shield

72s.jpg (15446 bytes)

Go to catalog page
..

The 72 Series MagJack and filter jack connectors offer filtering capabilties for your high-speed network and telecom applications.  By integrating the magnetics into the jack body, MagJack high-speed connectors improve your signal while saving you board space.

Features/Benefits

  • MagJack efficiently houses magnetic components in standard-size RJ11 and RJ-45 jacks
  • MagJack is available in three versions: common mode choke, magnetics with capacitor, magnetics without capacitor
  • MagJack shields magnetics from internally and externally generated noise
  • Circuits for MagJack are available for 10Base-T, 100Base-T, Token Ring, ATM, ISDN, telecom, and TP-PMD applications
  • MagJacks and filter jacks are available in multiport harmonica style
  • MagJacks and filter jacks are compatible with industry-standard contact footprint and envelope dimensions
  • Filter jacks are fast, drop-in replacements for standard jacks to reduce EMI emissions

 

Specifications

Materials
Jack Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Copper alloy
Contact Plating: Selective gold plate in contact area,   tin-lead in solder tail area
Shieldeing: Tin-plated brass

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)
Jack Tolerances and Dimensions: Compliant with FCC requirments

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Series 68

Surface-Mount, Modular Jacks
Unshielded

68s.jpg (12256 bytes)

Go to Catalog Page
..

The 68 Series modular jacks feature major advancemensts in surface-mount technology.  The SOF-LOK posts use metal tabs to lock the jack tightly to the board with minimum impact.  And for maximum durability, the pogo-action contacts provide uniform pressure to the solder pads and absorb the shock of repeated mating cycles.

 

Features/Benefits

  • Coplanarity ensured with pogo-action contacts
  • SOF-LOK board attachment feature for low-impact mounting
  • Available in standard 6 and 8 contact positions
  • Accomodate board thicknesses from .028 inches [.711]
  • Contacts available with 30 [.762 um] or 50 [1.27 um] micro inch gold plate in contact area
  • High-temperature housing for surface-mount processing
  • Certifiable to FCC specifications when plated with 50 microinches of gold
  • Available with keying and flange options
  • Designed for  high-temperature soldering processes
  • See How to Order for additional options

 

Specifications

Materials
Jack Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Phospor Bronze
Contact Plating: Selective gold plate in contact area, tin-lead in solder tail area

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)
Jack Tolerances and Dimensions: Compliant with FCC requirments

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Series 31 and 32

Compu-shield Modular Plugs
Shielded

3132s.jpg (11677 bytes)

Go to catalog page
..

Compu-shield modular plugs are designed for optimum reliability and error-free data transmissions.  Each plug features innovative, easy-to-release latches, molded to the body for efficient release and insertion.  The latch arms are protected, improving their resistance to wear and tear and extending the life of the plug.

Features/Benefits

  • Fully shielded connectors offer maximum protection from EMI
  • Quick-and-easy plug terminations using patented load bar wire management systems
  • Gold-plated contacts deliver high corrosion resistance and reliability
  • Plugs accomodate 28 to 24 AWG conductors
  • Contacts terminate stranded or solid conductors
  • Available in 6-, 8-, 10-, 15-, and 25-contact configurations
  • Choose from straight, right-hand or left-hand cable entries
  • See How to Order for additional options

6162st.jpg (4452 bytes)
'Click' for information on Compu-shield Modular Jacks

 

Specifications

Materials
Plug Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Phosphor bronze
Contact Plating: 50 microinches [1.27 um] selective gold plate
Shieldeing: Tin-plated brass

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)
Jack Tolerances and Dimensions: Compliant with FCC requirments

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Series 61 and 62

Compu-shield Modular Jacks
Shielded

6162s.jpg (11775 bytes)

Go to catalog page
..

Stewart Compu-shield modular jacks offer optimum reliability and security for error-free data transmissions.   Compu-shield jacks offer a rugged, diecast alloy body for secure mounting to a bulkhead.  The jacks are designed for maximum vibration resistance and reliability.

Features/Benefits

  • Offer maximum protection from EMI
  • Jacks are available in right-angle, vertical and cable-mount bulkhead styles
  • Low-profile jacks offer a variety of flange options
  • Available in 6-, 8-, 10-, 15-, and 25-contact configurations
  • Contacts use gold plating for maximum efficiency
  • See How to Order for additional options

 

3132st.jpg (3543 bytes)
'Click' here for more information on
Compu-Shield Modular Plugs

 

Specifications

Materials
Jack Housing: UL 94V-0-rated glass-filled thermoplastic
Contacts: Phosphor bronze
Contact Plating: All gold plate
Shieldeing: Plated diecast

Electrical Characteristics
Current Rating: 1.5A (maximum) at 25d C
Voltage Rating: 150 VAC (maximum)
Low-Level Contact Resistance: 15 m(ohms) maximum allowable change (using Stewart Connector plug)
Dielectric Withstanding Voltage: 1000 Vrms, 1 min, (60Hz)
Insulation Resistance: 500 M(ohms) (minimum)

Mechanical Characteristics
Contact Normal Force: 100 g (minimum)

Environmental Characteristics
Operating Temperature: -20d C to 85d C

Approvals/Certifications
UL Component Recognized  CSA Certified
Meets requirments of FCC Part 68.5 when plated with 50 [1.27um] microinches of gold

Back to TopConnector GuideHome Page

For more information, please call us at (714) 674-5090 or FAX (714) 674-5088.
Interconnect Specialties Inc.
590 West Central Avenue
Unit H
Brea, CA  92821
inspinc@aol.com