Interconnect Specialties, Inc.

 

It’s a good connection to have.

 

Located in

Southern California

 

Phone 714-674-5090   Fax 714-674-5088

 

Products

 

Services

 

Manufacturers

 

About

 

Contact

 

                   Home

 

Trompeter    << back

 

Coax Connectors

 

 

trompeter2.jpg (4595 bytes)

Go to catalog page
..

Trompeter's quality coax connectors are designed with "unique features" to provide superior mechanical performance, simple construction for fast, easy assembly, and excellent electrical perfomance.

Features

  • All metallic parts are machined/formed to extremely close tolerances.
  • All bodies are made of top quality brass witha bright nickel-plated, non-tarnish finish, standard.
  • Fully enclosed, heat-treated, beryllium-copper outer conductor spring (not half-hard slotted brass).
  • Heat-treated, beryllium-copper center socket contact with 50 millionths inch gold plating
  • All dielectrics are made of machined Teflon.

 

Benefits

  • Improves EMI/RFI suppression and reduces signal loss.  Better intermateablity.
  • Resists tarnish and the associated reduction of conductivity.
  • Prevents outer contact distortion and mechanical damage.   Improves EMI/RFI suppression and reduces signal loss.  Improves durability cycling providing positive electrical contact over thousands of cycles.
  • Superior spring properties, maintatins contact resilience.   Improves durability cycling providing positive electrical contact over thousands of cycles.
  • Superior Teflon insulating properties to withstand the high temperatures encountered when soldering.

Coax Wrench Crimp BNC/TNC Connectors

 

Coax Tool Crimp BNC/TNC Connectors

wrenchcrmp.jpg (10232 bytes)

Go to catolog page
..

 

toolcrmp.jpg (10233 bytes)

Go to catalog page
..

Series 20 ... BNC Connectors
Series 40 ... TNC Threaded Connectors
Series 120 ... BNC/TNC Push-On Connectors
Series 50/350 ... Sub-Miniature BNC/TNC

 

Series 220 ... BNC Connectors
Series 240 ... TNC Threaded Connectors
Series 120 ... BNC/TNC Push-On Connectors
Series 50/350 ... Sub-Miniature BNC/TNC

Features

  • Three piece construction.
  • Captive center contact pin in cone assembly.
  • Spring-loaded coupling ring using beryllium-copper crescent washer.
  • Freely rotating captured insert inside the clamp-nut assembly.
  • Stepped captured insert inside the clamp-nut assembly.
  • 360 metal-to-metal, sandwich braid capture of the outer-braid-to cone assembly.  (No insulation between the clamping surfaces.)
  • Machined barb on the end of the cone assembly.

Benefits

  • Faster, easier assembly.
  • Prevents pistoning of the center contact when cable is flexed.   Does not rely on cable for positioning.
  • Pre-loading the ring assures positive full mating.  Reduces intermittences and rocking of mated connector.  Assures mating is maintained in rugged applications.
  • Permits braid and jacket clamping without rotary movement.   Prevents breaking the center conductor.  Prevents twisting/tearing the braid.   Increases connector-to-cable tensile pull strength.
  • Grips the cable's outer jacket (25% of cable strength).   Increases connector-to-cable tensile pull-strength.
  • Provides a true metal-to-metal continuous shield.  Minimizes EMI/RFI and TFE jacket cold-flow problems.  Increases connector-to-cable tensile pull-strength.
  • Grabs the inside of the cable braid for easier assembly.   Enhances the strength of the braid and jacket clamp.

 

Features

  • Three piece construcion.
  • Captive center contact pin with 50 millionths inch gold plating.
  • Spring-loaded coupling ring using a beryllium-copper crescent washer.
  • Full 1/2 inch crimp sleeve.
  • Stepped crimp sleeve.
  • Radial and axial grooves on ferrule.
  • .300 inch ferrule.

Benefits

  • Faster, easier assembly.
  • Prevents center-contact pistoning when cable is flexed.  Does not rely on cable for positioning.
  • Assures mating is maintained in rugged applications.  Reduces rocking when connector is mated.  Reduces intermittences.
  • Longer crimp sleeve area for mechanical crimp.  Increases connector-to-cable tensile pull-strength.
  • Grips the outer jacket (25% of cable strength) of the cable. Increases connector-to-cable tensile pull-strength.
  • Crimping embeds braid into grooves.  Prevents radial and axial movement of the cable.  Increases connector-to-cable pull-strength.
  • Longer ferrule area for mechanical crimp.  Increases connector-to-cable tensile pull-strength.

Series 90

 

Coax "N" Connectors

nconnector.jpg (14588 bytes)

Go to catalog page
..

 

Trompeter's 90 Series incorporates many of the features of their BNC lines including three piece wrench crimp configuration, gold plated captive center contacts, beryllium copper female contacts, and PTFE dielectrics.   The 90 Series will also accomodate nonflammable plenum coax cables.  The "N" Connector Series are utilized for interconnection on antenna towers, lightning protection boxes, power distribution and ancillary systems.  Trompeter offers a complete line of remarkable new 50 ohm "N" connectors for current industry standard flexible and corrugated cables.



Connector GuideHome Page

For more information, please call us at (714) 674-5090 or FAX (714) 674-5088.
Interconnect Specialties Inc.
590 West Central Avenue
Unit H
Brea, CA  92821
inspinc@aol.com