Virginia Plastics Modular Jacks

Interconnect Specialties, Inc.

It’s a good connection to have.

Located in

Southern California

Phone 714-674-5090 Fax 714-674-5088

Virginia Plastics << back

Modular Jacks
	Data Transmission (DT) Series Recessed Contact (RC) Series		Safety Probe (SP) Series Universal PCB Layout for Modular Connectors

Data Transmission (DT) Series
DT Series Ground Strap DT Series
Go to Catalog Page Universal PCB Layout for Modular Connectors ..
Features/Benefits Impedance matching contact configuration Minimized standing wave reflections Capable of data transmission rates of 100Mbps Large surface mating area for long contact life Multiple points of contact for connection integrity Mating life of 750 or 1,000 cycles minimum Highest reliablitiy contact material-beryllium copper Contacts are not damaged when overstressed by smaller modular plugs Applications Local Area Networks Patch Panels Wide Area Networks Passive Hub Mulit Access Unit Active Hub Modems Computer Peripherals Low Profile Ground Strap DT Series Compatible with all FCC standard 6 and 8 position plugs Utilizes ground strap contact No special on non-standard male connectors required Provides more efficient EMI transfer and control than standard spring contacts Grounding is from cable drain wire pierced by contact blade (of plug) mated to ground stap contact Ground strap body has better width-to-depth coupling through the ground path compared to standard body Ground strap is not interleaved with any contacts carrying data signals to reduce signal coupling through the ground path Ground strap solder post located at side of connector, physically away from signal traces, and can be surrounded by ground place of PCB Available in left hand or right hand version			Connector Technical Specifications Electrical Contact Resistance: 10milohms max per contact Intitial After Cycling: 20 miliohms max. Insulation Resistance: 1000 megohms min. Dielectric withstanding voltage: 1300VRMS @ 60 sec. duration (adjacent contacts) Current Rating: 3.0 amps max. per contact Contact Interruptibility: no interruption of duration > 50 micro sec. during rotation of a mated VPC cordset Durability: 1000 min. mating cycles Material Female Connector Housing/cover: High temperature polyamide and/or polyester Housing/cover flammability: passes UL94V-0 Contact: Beryllium Copper Barrier Update: 50 micro-inch min. nickel Plating: (Type 1-Standard) 15 micro-inch min. AUPD gold alloy (comparable to 30 micro-inch hard gold) (Type 2-Optional) 30 micro-inch min. AUPD gold alloy (comparable to 50 micro-inch hard gold) Solder Post: 100 micro inch minimum tin lead Mechanical Insertion Force: 2lbs. max. to fully insert male into female Plug Retention in Female: 20 lb max. load shall not disengage and maintains electrical continuity Female Retention on P.C. Board: 20 lb max. load Spring Contact Life: >5,000 cycles nominal

Recessed Contact (RC) Series
RC Series Traditional Modular Female Connector
Go to Catalog Page Universal PCB Layout for Modular Connectors ..
Features/Benefits More defined contact surface Better impedance and crosstalk parameters Impedance matchin contact configuration Minimized standing wave reflections Capable of data transmission rates of 100Mbps Multiple points of contact for connection integrity Mating life of 750 or 1,000 cycles minimum Highest reliability contact material-beryllium copper Contacts are not damaged when overstressed by smaller modular plugs Applications Barcode Equipment Computer Keyboards Modems Mobil Communications Medical Equipment Optical Scanning Equipment Aircraft Equipment Instrumentation Systems Automotive Test Equipment Fax Machines Data Collection Systems Types Low Profile: Total height less than .50 inch Occupies minimal PCB real estate Connector depth less than .75 inch Universal connector body size		Connector Technical Specifications Electrical Contact Resistance: 10milohms max per contact Intitial After Cycling: 20 miliohms max. Insulation Resistance: 1000 megohms min. Dielectric withstanding voltage: 1300VRMS @ 60 sec. duration (adjacent contacts) Current Rating: 2.0 amps max. per contact Contact Interruptibility: no interruption of duration > 50 micro sec. during rotation of a mated VPC cordset Durability: 750 min. mating cycles Material Female Connector Housing/cover: High temperature polyamide and/or polyester Housing/cover flammability: passes UL94V-0 Contact: Beryllium Copper Barrier Update: 50 micro-inch min. nickel Plating: (Type 1-Standard) 15 micro-inch min. AUPD gold alloy (comparable to 30 micro-inch hard gold) (Type 2-Optional) 30 micro-inch min. AUPD gold alloy (comparable to 50 micro-inch hard gold) Solder Post: 100 micro inch minimum tin lead Mechanical Insertion Force: 2lbs. max. to fully insert male into female Plug Retention in Female: 20 lb max. load shall not disengage and maintains electrical continuity Female Retention on P.C. Board: 20 lb max. load Spring Contact Life: >3,000 cycles nominal

Safety Probe (SP) Series
SP Series
Go to Catalog Page Universal PCB Layout for Modular Connectors ..
Features/Benefits Conforms to Underwriters Laboratories (UL) Requirements that a peson cannot reach parts that involve risk of electric shock reducing product liablity Meets requirements of International Electrotechnical Commission (IEC) safety probe test Spring contact cannot be reached by UL (IEC) Test Finger Probe when inserted into the opening of the plug No moving covers needed and unique design prevents bypassing safety doors Recessed, protected contact mating portion Rectangular surface mating area for good contact life Multiple points of contact for connection integrity Mating life of 500 or 750 cycles minimum Highest reliability contact material-beryllium copper Contacts are not damaged when overstressed by small modular plugs Applications This part has been designed to prevent access to parts that involve risk of electrical shock. Some examples are: Telephones (ringer voltage 120 volts and could shock a small child), Boards with more the one jack per board (if only one jack is plugged into, the other jacks go "live"). SP could be used in the same applications as DT and RC where higher voltages are present		Connector Technical Specifications Electrical Contact Resistance: 10milohms max per contact Intitial After Cycling: 20 miliohms max. Insulation Resistance: 1000 megohms min. Dielectric withstanding voltage: 1300VRMS @ 60 sec. duration (adjacent contacts) Current Rating: 2.0 amps max. per contact Contact Interruptibility: no interruption of duration > 50 micro sec. during rotation of a mated VPC cordset Durability: 750 min. mating cycles Material Female Connector Housing/cover: High temperature polyamide and/or polyester Housing/cover flammability: passes UL94V-0 Contact: Beryllium Copper Barrier Update: 50 micro-inch min. nickel Plating: (Type 1-Standard) 15 micro-inch min. AUPD gold alloy (comparable to 30 micro-inch hard gold) (Type 2-Optional) 30 micro-inch min. AUPD gold alloy (comparable to 50 micro-inch hard gold) Solder Post: 100 micro inch minimum tin lead Mechanical Insertion Force: 2lbs. max. to fully insert male into female Plug Retention in Female: 20 lb max. load shall not disengage and maintains electrical continuity Female Retention on P.C. Board: 20 lb max. load Spring Contact Life: >3,000 cycles nomina

For more information, please call us at (714) 674-5090 or FAX (714) 674-5088.
Interconnect Specialties Inc.
590 West Central Avenue
Unit H
Brea, CA 92821
inspinc@aol.com